Bicycles on The Rapid

All buses in The Rapid system are equipped with either a double-loading or triple-loading bike rack that fit most two-wheeled bicycles, including children's bikes.

How to use the bike racks

• Before loading your bike, be sure all loose items are secured or removed.
• When the bus stops, walk your bike to the front of the bus, keeping a safe distance from traffic.
• Lift the handle to release the rack and lower it into the down position. Listen for the click to make sure it locks in place.
• Place the front tire of your bike in the position marked "FRONT TIRE" and slide your rear tire into the back slot.
• Lift the spring-loaded arm over the front tire — your bike is now loaded and you can board the bus as normal.
• To unload your bike at your stop, reverse the directions above. Remember to release the spring-loaded arm before removal.
• Return rack to its upright position and be sure it locks.
• Watch our bike rack video here. 

Rules to Remember

• You are responsible for loading and unloading your own bike. The drivers are not able to assist you.
• There is no additional fare for using the racks.
• If you are the first bike on the bus, please use the inner rack (the one closest to the front of the bus).
• The Rapid is not liable for any damage caused to bikes or bike accessories that are transported.
• Bikes left on the bus and not reclaimed within 30 days will be donated to local charities. 

Local Biking Resources